Repairs to uPVC Windows
uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs and improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause serious damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.
For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when windows with double panes are secured by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.
If you're planning to try to remove the glass panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not onto the floor, where they could be trampled under.
It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your property until a professional is able to repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is substantial, you may prefer a security screen that also has a window. This will provide the best of both.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they can suffer from a variety of issues, including sagging. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.
To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. After that, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the an appropriate fit. If you're happy with the fit, tighten the screws until they stay in position.
If you are unable to reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.
uPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need close the window and then perform an experiment to ensure that it fits. The corners of the sash must align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and turn the mechanism back into the position it was in.
3. Water Leaks
If you awake to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking may need to be removed before a fresh layer can be put on. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.
It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.
Mold spots and rotten sills are also signs of water leakage. This fungus thrives in damp conditions and get more info can spread quickly throughout the house.
It is also important to remember that if the leakage originates from the glass of your double glazed windows it may be more likely to be here an issue with the glass seal rather than the frame or sagging. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC upvc windows repairs windows are stiff to open, or are loose and open with a breeze It could be the hinges that are at fault. They can be repaired by any skilled DIYer and can be completed in a matter of minutes.
Like all mechanical parts hinges will wear out over time. Changing a window hinge is essentially a simple process but it can be easier to do if you have someone to help hold the frame up.
Verify that the uPVC hinges are open and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.
The problem can be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to offer suggestions.
Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a variety of various factors. First, the hinges because of wear and tear, could become misaligned. This can cause a gap to form between the sash and the frame. If they are damaged beyond repair, it may be required to realign them. Second, the interlock can also become disaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace the hinges.
The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time more info and let air escape through the gaps. Replacing these with high-quality weatherstripping is a good way more info to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.
The last way to reduce draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will help block out cold air and keep your home warm and cozy!
With a little regular maintenance and repairs windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and eventually, they will reach an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.